User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Structure
- Chapter 3 Network Parameters Configuration
- Chapter 4 Access to DS-6700 by Client Software
- Chapter 5 Access to DS-6700 by WEB Browser
- Chapter 6 Live View
- Chapter 7 Device Configuration
- 7.1 Local Configuration
- 7.2 Configuring Time Settings
- 7.3 Network Settings
- 7.3.1 Configuring TCP/IP Settings
- 7.3.2 Configuring Port Settings
- 7.3.3 Configuring DDNS Settings
- 7.3.4 Configuring PPPoE Settings
- 7.3.5 Configuring Email Settings
- 7.3.6 Adding Network Disk
- 7.3.7 Configuring SNMP Settings
- 7.3.8 Configuring QoS Settings
- 7.3.9 Configuring FTP Settings
- 7.3.10 Configuring SOCKS Settings
- 7.3.11 Configuring UPnPTM Settings
- 7.3.12 Configuring HTTPS Settings
- 7.3.13 Configuring Bonjour Settings
- 7.3.14 Configuring IP Address Filter
- 7.3.15 Configuring Multicast Address
- Chapter 8 Camera Settings
- Chapter 9 Record/Capture Settings
- Chapter 10 Playback
- Chapter 11 Managing User Accounts
- Chapter 12 Log Search and Maintenance
- Chapter 13 FAQ
User Manual of DS-6700 Series Audio/Video Encoder
8
One 10M/100Mbps adaptive Ethernet interface (PoE) for DS-6701/6704HFI/HWI models.
One 10M/100M/1000Mbps adaptive Ethernet interface for DS-6708/6716HFI/HWI and
DS-6701/6704/6708/6716HFI/HWI-SATA models.
Accessible by multiple web browsers: IE, FireFox, Chrome and Safari.
Remote web browser access by HTTPS ensures high security.
Netfilter builds internet firewalls based on packet filtering.
QoS protocol enhances the data transmission performance.
Support SNMPv1/v2c/v3 simple network management protocol.
mDNS-based Apple’s Bonjour protocol enables automatic discovery of devices.
Support email notifications, FTP upload and alarms upload by SOCKS v4/v5 proxy server.
Zero configuration networking (Zeroconfig) enables the device to automatically obtain the IPv4 link-local IP
addresses (range: 169.254.1.0~169.254.254.255).
Auto/Manual port mapping by UPnP™.
Support PSIA, ONVIF, HIKCGI and GENETEC protocols.
Support SADP software to automatically search and discover the online devices in local network area.
Automatically get IP address by DHCP protocol.
RTSP/RTP standard stream media protocol allows user to live view by unicast.
Multicast address for live view of multiple cameras through network.
Two-way audio and single-directional broadcasting.
Transmission via RS-232 and RS-485 transparent channel.
Note: DS-6701HFI/HWI model provides no RS-232 interface.
Access to Internet by PPPoE method, and support Peanut Hull, DynDNS, HiDDNS, etc.
Set time by NTP.
Connectable with network HDD in NAS, IPSAN mode.
Send email by SMTP protocol, and support attachment of captured JPEG image and SSL encryption.
Remote JPEG image capturing with user-defined image resolution and quality.
PTZ Control
Support Multiple PTZ Protocols
Different channels can be configured with protocol type, RS-485 address, baud rate, data bit, stop bit, even &
odd parity, stream control method, etc.; and remote configuration of presets, patrols and patterns.
Digital Zooming (with Speed Dome)
When connected with Hikvision speed dome, digital zooming can be realized by clicking on the image
through client software.
PTZ linkage
Relay input alarm can be responded with PTZ linkage actions, e.g., callup of predefined presets, patrols or
patterns.
Alarm
Relay Alarm Input
Either NO mode or NC mode can be set.
Four different alarm arming periods are configurable.
Capabilities of triggering corresponding alarm handling methods, relay alarm output, buzzer alarm, upload
to control center, PTZ linkage, presets/patrols/patterns callup, etc.
Relay Alarm Output
Relay alarm output can be connected with alarm devices for alarm handling within arming period.