User Manual

User Manual of DS-6700 Series Audio/Video Encoder
50
Figure 7.29 Bonjour Settings
2. Check the checkbox to enable the Bonjour function.
3. Edit the name of device. The name is shown when the device is detected by the system.
Note: Only the letters, numbers and “-” can be contained in the name.
4. Click Save to save the settings.
7.3.14 Configuring IP Address Filter
Purpose:
You can allow or forbid access by specified IP addresses to the encoder by enabling IP Address Filter.
Up to 256 IP address can be added to the list (allowed/forbidden) by Web Browser.
Steps:
1. Click Remote Configuration > Network Settings > IP Address Filter to enter the IP address filter settings
interface.
Figure 7.30 IP Address Filter Settings
2. Check the checkbox of Enable IP Address Filter.
3. Select the filter type of IP address to Allowed or Forbidden.
4. Click the Add button to add the IP address to be allowed or forbidden.
Figure 7.31 Add IP Address
5. Click the Add button to add the IP address to be allowed or forbidden.
Note: Up to 256 IP address can be added to the list (allowed/forbidden) by Web Browser.
6. Click Save to save the settings.