User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Structure
- Chapter 3 Network Parameters Configuration
- Chapter 4 Access to DS-6700 by Client Software
- Chapter 5 Access to DS-6700 by WEB Browser
- Chapter 6 Live View
- Chapter 7 Device Configuration
- 7.1 Local Configuration
- 7.2 Configuring Time Settings
- 7.3 Network Settings
- 7.3.1 Configuring TCP/IP Settings
- 7.3.2 Configuring Port Settings
- 7.3.3 Configuring DDNS Settings
- 7.3.4 Configuring PPPoE Settings
- 7.3.5 Configuring Email Settings
- 7.3.6 Adding Network Disk
- 7.3.7 Configuring SNMP Settings
- 7.3.8 Configuring QoS Settings
- 7.3.9 Configuring FTP Settings
- 7.3.10 Configuring SOCKS Settings
- 7.3.11 Configuring UPnPTM Settings
- 7.3.12 Configuring HTTPS Settings
- 7.3.13 Configuring Bonjour Settings
- 7.3.14 Configuring IP Address Filter
- 7.3.15 Configuring Multicast Address
- Chapter 8 Camera Settings
- Chapter 9 Record/Capture Settings
- Chapter 10 Playback
- Chapter 11 Managing User Accounts
- Chapter 12 Log Search and Maintenance
- Chapter 13 FAQ
User Manual of DS-6700 Series Audio/Video Encoder
20
Chapter 4 Access to DS-6700 by Client
Software
The DS-6700 Series Audio/Video Encoder can be accessed by iVMS-4200 client software (provided in attached
CD). Please refer to the User Manual of iVMS-4200 Client Software for more information.
The computer which runs the iVMS-4200 client software should meet the following requirements:
Operating System: Microsoft Windows 2000 or higher
CPU: Intel Pentium IV 3.0 GHz or higher
RAM: 1G or higher
Display: 1024×768 resolution or higher
4.1 Starting iVMS-4200 Client Software
Install the iVMS-4200 software on your PC according to the prompts. For the first time to use the iVMS-4200
software, you need to register a super user for login.
Figure 4.1 Register User
Enter the super user name, password and confirm the password in the dialog box and click Register. Then, you
can log in as the super user.
Note: Enter, Space, and TAB keys are invalid for the user name and password. The password cannot be empty,
and it should not be less than six characters and can’t be copied and pasted.
4.2 Accessing to DS-6700
Click StartAll ProgramsiVMS-4200 Client to start the client software. After successful login, you can enter
the following main interface of the client software.