User Manual

Table Of Contents
User Manual of DS-6400HDI-T Decoder
36
4.3 Configuring Remote Playback
Purpose:
You can play back the record files stored in the remote encoding devices.
4.3.1 Normal Playback
Steps:
1. Click Decode Operation >Remote Playback to enter the remote playback interface:
Figure 4.36 Configure Remote Playback
2. Select a Decoding Channel from the drop-down list for playback.
3. You can playback the video files of the encoding device by IP Mode or DDNS mode.
Task 1: Playback Video Files of the Encoding Device by IP Mode
1) Check the checkbox of IP Mode.
2) Enter the device information in the Remote Host Address, Remote Host Port, Channel Type
(Normal), Remote Host Channel No., and login User Name and Password of the encoding device.
Figure 4.37 Playback Video Files of the Encoding Device by IP Mode