User Manual
Table Of Contents
- CHAPTER 1 Introduction
- CHAPTER 2 Panels and Connections
- CHAPTER 3 Initial Network Parameters Configuration
- CHAPTER 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoding Operation
- 4.1.1 Configuring Decoded Video Display
- 4.1.2 Configuring Dynamic Decoding
- 4.1.3 Configuring Cycle Decoding
- 4.1.4 Configuring Video Wall Display
- 4.1.5 Enabling/Disabling the Decoding Channel
- 4.1.6 Configuring Picture Overlay
- 4.1.7 Checking the Connection Status
- 4.1.8 Checking the Decoding Channel Status
- 4.1.9 Checking the Display Channel Status
- 4.1.10 Configuring Transparent Channel
- 4.2 Decoder Configuration
- 4.2.1 Checking Device Information
- 4.2.2 Configuring Time Settings
- 4.2.3 Configuring Basic Network Settings
- 4.2.4 Configuring DDNS Settings
- 4.2.5 Configuring RS-485/RS-232 Serial Port
- 4.2.6 Configuring Alarm Input / Output Settings
- 4.2.7 Configuring Arming Time
- 4.2.8 Managing User Account
- 4.2.9 Importing/Exporting Parameters
- 4.3 Configuring Remote Playback
- 4.4 Switching Working Mode
- 4.5 Rebooting, Upgrading and Restoring the Default Settings for the Decoder
- 4.1 Decoding Operation
- CHAPTER 5 Decoder Configuration and Operation by Client Software
- CHAPTER 6 Appendix
User Manual of DS-6400HDI-T Decoder
10
2.1 Front Panel
Figure 2.1 Front Panel of DS-6401HDI-T
Table 2.1 Description of Front Panel
Figure 2.2 Front Panel of DS-6404/6408/6410/6412/6416HDI-T
Table 2.2 Description of Front Panel
2.2 Rear Panel
Figure 2.3 Rear Panel of DS-6401HDI-T
1 2 3 4 5 6 7
1 2 3 4
5
6
LED Indicator & Interface
Connections
1
POWER
Power LED indicator
2
LINK
Network connection LED indicator
3
Tx/Rx
Data transmitting/receiving status LED indicator
4
HDMI Video Output
HDMI output of decoded video
5
VGA Video Output
VGA output of decoded video
6
Audio Output
Audio output, 3.5mm connector
7
Video Output
Video output, BNC connector
LED Indicator & Interface
Connections
1
POWER
Power LED indicator
2
LINK
Network connection LED indicator
3
Tx/Rx
Data transmitting/receiving status LED indicator