Quick Start Guide
Table Of Contents
- 1 Appearance Description
- 2 Installation
- 3 Activate and Access Network Camera
Network Covert CameraยทQuick Start Guide
49
2.5 Installing the Ball-Shaped Sensor Unit
2.5.1 Mounting with the Included Bracket
Steps:
1. Paste the drill template to the desired mounting place. Drill two
screw holes and a hole for routing cable according to the drill
template.
Figure 2-33 Drill Template
2. Route the camera cable through the mounting base of the
included bracket. Fixed the mounting base to the wall or ceiling.