User Manual

User Manual of Handheld Thermography Camera
vii
● DO NOT swallow the battery to avoid chemical burns.
● DO NOT place the battery in the reach of children.
Maintenance
● Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
● If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
Using Environment
● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or
damp environments. Make sure the running environment meets the requirement of
the device. The operating temperature shall be 10 °C to 35 °C (50 °F to 95 °F), and
the operating humidity shall be 90% or less.
● This device can only be safely used in the region below 2000 meters above the sea
level.
● Avoid equipment installation on vibratory surface or places subject to shock (neglect
may cause equipment damage).
● Do not aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd
COMPLIANCE NOTICE: The thermal series products might be subject to export controls
in various countries or regions, including without limitation, the United States, European
Union, United Kingdom and/or other member countries of the Wassenaar Arrangement.
Please consult your professional legal or compliance expert or local government
authorities for any necessary export license requirements if you intend to transfer,
export, re-export the thermal series products between different countries.
User Manual of Electrical Version