User Manual

User Manual of Handheld Thermography Camera
vi
Symbol
Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Safety Instructions
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
Laws and Regulations
● Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation and Storage
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and the company shall not take any responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Power Supply
● Please use the power adapter, which is provided by normal company. Input voltage
should meet the Limited Power Source (5 VDC, 2A) according to the IEC61010-1
standard. Please refer to technical specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid over-heating or
fire hazards caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion hazard. Replace
with the same or equivalent type only. Dispose of used batteries in conformance
with the instructions provided by the battery manufacturer.
● Do not charge other battery types with the supplied charger. Confirm there is no
flammable material within 2 m of the charger during charging.
● For long-term storage of the battery, make sure it is fully charged every half year to
ensure the battery quality. Otherwise, damage may occur.
● DO NOT place the battery near heating or fire source. Avoid direct sunlight.