User Manual

User Manual of Handheld Thermography Camera
21
Interval Alarm
Set the alarm temperature section (e.g.,
90 °C to 150 °C), when target temperature
is within the section (e.g., 100 °C), the
device alarms.
Insulation Alarm
Set the alarm temperature section (e.g.,
90 °C to 120 °C), when target temperature
is without the section (e.g., 70 °C or
125 °C), the device alarms.
5. Press to exit.
• Go to Local Settings > Image Settings >Audible Warning. Tap on
to enable audible warning. The device will sound when alarm
is triggered.
• This function varies according to different camera models.
5 Picture and Video
Before you start:
Insert memory card into the device, then you can record videos, capture
snapshots, and mark and save important data.
• Device does not support capturing or recording when the menu is
shown.
• When the device is connected to your PC, it does not support
capturing or recording.
• Go to Local Settings > Device Settings > Filename Header. You can
set the filename header for capturing or recording to distinguish the
files recorded in a specify scene.
5.1 Capture Picture
You can set the Flashlight Setting ON/OFF if required.
Go to Local Settings > Image > Picture Resolution to set the
resolution of optical image if required.
Steps:
1. Select Local Settings (
) from the main menu.
2. Go to Local Settings > Camera Settings > Trigger Settings.