User Manual

User Manual of Handheld Thermography Camera
17
4. Press OK to confirm. The temperature of custom point
(e.g. P1) displays P1: XX.
5. Repeat step 1 to 3 to set other custom points.
At most ten custom points supported.
4.3.2 Set Line Rule
Steps:
1. Choose
on the interface.
2. Press OK to generate a default line.
3. Press the △, ▽, ▷, and ◁ to move the line
up/down/left/right.
4. Drag points of the line on the touch-screen to extend
or shorten the line.
5. Press OK. The Max. Temperature, Low Temperature,
and Average Temperature of line (e.g. L1) displays L1
Max: XX Min: XX Avg: XX. The real-time
temperature trend chart will display.
Only one line supported.
4.3.3 Set Frame Rule
Steps:
1. Choose on the interface.
2. Press OK to generate a default frame.
3. Press the △, ▽, ▷, and ◁ to move the frame
up/down/right/left.
4. Press to enlarge the frame, and press to
contract the frame. Or you can drag the corner of the