User Manual
Table Of Contents
User Manual of Handheld Thermography Camera
7
2.2 Power On/Off
Power On
Remove the lens cover, and hold the
button for over three seconds
to turn on the device. You can observe the target when the interface of
the device is stable.
It may take at least 30 s until the device is ready for using when you
power on it.
Power Off
When the monocular is turned on, hold the
button for three
seconds to power off the device.
2.2.1 Set Auto Power-off Duration
Go to Local Settings ( ) > Device Settings > Auto Power-off Duration
Settings to set the automatic shutdown time for device as required.
2.3 Operation Methods
The device supports both touchscreen control and button control.
Touchscreen control
Tap on the screen to configure the device.