Instructions

2
Camera Installation
 The camera should be set in front of the one-direction path, capturing the full
faces of passing persons, as shown below.
 The installation height is recommended to be set as 1.5-1.7m, namely the camera
should be set with the same height of human faces, or even be set with a
low elevation angel, thereby reducing error caused by other heat sources near the
ground.
 The distance between the camera and measured objects is recommend to be set
as 1-1.5m normally.
 Avoid any other object whose temperature is higher than human body’s in the
background of camera view.
 This handheld thermal camera could be mounted on tripod without extra
adapters. There is tripod offered by HIKVISION for fixed placement, but it requires