Instructions

User Manual of Thermographic Handheld Camera
vii
necessary.
● If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
● A few device components (e.g., electrolytic capacitor) require regular replacement.
The average lifespan varies, so periodic checking is recommended. Contact your
dealer for details.
Using Environment
● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or
damp environments. Make sure the running environment meets the requirement of
the device. The operating temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and
the operating humidity shall be 90% or less.
● This device can only be safely used in the region below 2000 meters above the sea
level.
● Avoid equipment installation on vibratory surface or places subject to shock (neglect
may cause equipment damage).
● Do not aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd
User Manual of Electrical Version
Scan the QR code to view the user manual on your mobile phone. Note that mobile
data charges may apply if Wi-Fi is unavailable.