User Manual

Table Of Contents
DS-2TD8167-190ZE2F/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
UM DS-2TD8167-190ZE2F/W 040521NA 61
10.2.14 Set Laser Parameters
Steps
1. Go to Configuration System Maintenance System Service.
2. Enable Laser Optical Axis Adjustment.
3. Adjust the optical zoom ratio to the maximum value via the PTZ control panel.
4. Click the direction buttons to adjust the laser position.
5. Adjust the sensitivity. The higher the value, the faster the cursor moves.
6. Click Save when the laser point is in the center of live view.
7. Go to Configuration Image Display Settings Image Enhancement to set the laser compensation
region.
8. Adjust the laser compensation level.
10.2.15 Set Palette
Select palette mode to display the thermal grayscale image as a color image.
Steps
1. Go to Configuration Image Display Settings.
2. Select the thermal channel.
3. Select a palette mode in Image Enhancement according to your need.
Result: The live view displays the image with a palette.
10.2.16 Set Target Color
You can set the color of the targets in different temperature ranges to identify the target quickly.
Steps
1. Go to Configuration Image Display Settings.
2. Select the thermal channel.
3. Click Image Enhancement, select Palette as White Hot or Black Hot.
4. Set the temperature value and color of High Temperature, Interval Temperature, or Low Temperature
targets.