User Manual

Table Of Contents
DS-2TD8167-190ZE2F/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
UM DS-2TD8167-190ZE2F/W 040521NA 48
the position is saved as a memory point. The device returns to the last memory point when it restarts.
3. Click Save.
8.14 Set PTZ Priority
The function can set the PTZ priority of different signals.
Steps
1. Go to Configuration PTZ Prioritize PTZ.
2. Set the priority signal and delayed time.
Network: The network signal controls the device with priority.
RS-485: The RS-485 signal controls the device with priority.
Delay: The time interval of PTZ operation controlled by different signals. When the operation with
high priority is finished, the low priority signal controls the device after the setting interval.
3. Click Save.