Quick Start Guide

Quick Start Guide of Thermal & Optical Bi-spectrum Network Bullet Camera
vi
● Use of the product must be in strict compliance with the local
electrical safety regulations.
Storage
● Store the device in dry, well-ventilated, corrosive-gas-free, no
direct sunlight, and no heating source environment. Neglect
may cause fire hazard.
● To avoid heat accumulation, good ventilation is required for a
proper operating environment.
● DO NOT touch the heat dissipation component to avoid
burns.
Transportation
● Keep the device in original or similar packaging while
transporting it.
● Keep all wrappers after unpacking them for future use. In
case of any failure occurred, you need to return the device to
the factory with the original wrapper. Transportation without
the original wrapper may result in damage on the device and
the company shall not take any responsibilities.
● DO NOT drop the product or subject it to physical shock.
Keep the device away from magnetic interference.
Installation
● When the device is mounted on wall or ceiling, the device
shall be firmly fixed.
● Avoid equipment installation on vibratory surface or places
subject to shock (neglect may cause equipment damage).
Power Supply