Quick Start Guide

Quick Start Guide of Thermal & Optical Bi-spectrum Network Bullet Camera
33
We highly recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better
protect your product.
4. Click OK.
You can check whether the activation is completed on the popup
window. If activation failed, please make sure that the password
meets the requirement and try again.
3.3 Modify the IP Address
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the SADP software or client software to search and
change the IP of network camera. We will take modifying the IP
Address via SADP software as an example to introduce the IP address
modification.
Steps:
1. Run the SADP software.
2. Select an active device.