Quick Start Guide

Quick Start Guide of Thermal & Optical Bi-spectrum Network Bullet Camera
8
Name
Description
are connected correctly.
Network
Interface
Connect to the LAN interface. PoE (802.3af)
is supported.
Alarm Interface
Two-way alarm input and alarm output are
supported.
Alarm In: IN1, G/IN2, and G
Alarm Out: 1A, 1B/2A, and 2B
Audio Interface
Audio In: Pickup
Audio Out: Loudspeaker
RS-485 Interface
Control line.
The cables may vary according to different models. Here
we list all types of cables for reference. Take the actual
product for the cables.
Alarm cables can be classified as 2-ch alarm inputs and
2-ch alarm outputs. ALARM-IN1 and ALARM-IN2 are alarm
input interfaces, and G indicates grounding interface. (1A,
1B) and (2A, 2B) indicate two alarm output interfaces.
To reset the camera to default parameters, you need to
hold the Reset button and power on the camera. After
powering on the camera, you must still hold the Reset
button for about 10 seconds.
1.6 Interfaces of Junction Box
For certain camera models, the power cable, alarm cable,
network cable, and audio cable are connected to the