User Manual

Thermal Network Bullet Camera User Manual
28
5.2.3 Configuring DST Settings
Purpose:
Daylight Saving Time (DST) is a way of making better use of the natural daylight by
setting your clock forward one hour during the summer months, and back again in the
fall.
Configure the DST according to your actual demand.
Steps:
1. Enter the DST configuration interface.
Configuration > System > System Settings > DST
Figure 5-7 DST Settings
2. Select the start time and the end time.
3. Select the DST Bias.
4. Click Save to activate the settings.
5.2.4 Viewing License
Purpose:
You can view the open source software licenses that are applied to the IP camera.
Steps:
1. Enter About Device interface: Configuration > System > System Settings >
About Device.
2. Click View Licenses.