User Manual

Thermal Network Bullet Camera User Manual
99
Figure 9-19 Basic Settings
2. Check the checkboxes of the interface to set the temperature measurement
configurations.
 Enable Temperature Measurement: Check the checkbox to enable
temperature measurement function.
 Enable Color-Temperature: Check the checkbox to display temperature
pallet in live view.
 Display Temperature Info. on Stream: Check the checkbox to display
temperature information in live view.
 Add Original Data on Capture: Check the checkbox to add original data
on capture.
 Add Original Data on Stream: Check the checkbox to add original data
on stream.
 Data Refresh Interval: Select the data refresh interval from 1s to 5s.
 Unit: Display temperature with Degree Celsius (°C)/ Degree Fahrenheit
(°F)/ Degree Kelvin (K).
 Temperature Range: Set the temperature range.
 Emissivity: Set the emissivity of your target. Note: The emissivity of each
object is different.
 Algorithm Version: View the version of current algorithm.
 Distance (m): The straight-line distance between the target and the
device.
3. Click Save to save the settings.
9.4.2 Advanced Settings
Purpose:
This function is used for measuring the temperature of detected spot and the device
compares temperature of selected regions and alarms.
Steps:
1. Enter Configuration > Temperature Measurement > Advanced Settings.
2. Select the temperature measurement and alarm configuration as Normal or