User Manual

Thermal Network Bullet Camera User Manual
96
Figure 9-18 Advanced Configuration
Detection Sensitivity [0~4]: Refers to the sensitivity of the camera detects a target.
The higher the value, the easier a target be recognized, and the higher the
misinformation is. The default value of 3 is recommended.
Background Update Rate [0~4]: It refers to the speed of the new scene replaces the
previous scene. The default value of 2 is recommended.
Minimum Target Size [0~4]: When the target size is smaller than the value, the
system’s VCA rule does not apply. The default value of 1 is recommended.
Displacement Constraint for Target Generation [0~4]: It refers to the target
generating effect. The higher is the value, the target is more accurate and the target is
generated slower.
Single Alarm: If single alarm is selected, the target in the configured area will trigger
the alarm for only once. If it is not checked, the same target will cause the continuous
alarm in the same configured area.
Leave Interference Suppression: Check this checkbox to stop the interference
caused by the leaves in the configured area.