Quick Start Guide

Camera
Switch/Router
Align the snap and notch.
i. Insert ⑤ into ④ .
ii. Secure ⑥ with ④ .
Water-proof Accessory Installation
Steps:
1. Feed the plugless network cable ⑦ through the lock nut ⑥ ,
waterproof rubber gasket ⑤ (rubber gasket inset ridge must
face waterproof endcap), and the water-proof endcap ④ in
order.
2. Crimp an RJ-45 network plug ③ onto the end of the cable,
taking care to insert the twisted pairs of wires in correct order.
3. Place the O-type gasket ② onto the end of the camera’s
network interface socket ① .