User Manual

Thermal Network Bullet Camera User Manual
71
Figure 8-4 Picture Overlay
2. Click Browse to select a picture.
3. Click Upload to upload it.
4. Check Enable Picture Overlay checkbox to enable the function.
5. Set X Coordinate and Y Coordinate values adjust the picture position on the
image. Adjust Picture Width and Picture Height to the desired size.
6. Click Save to save settings.
8.5 Configuring DPC (Defective Pixel Correction)
Purpose:
DPC (Defective Pixel Correction) refers to the function that the camera can correct
the defective pixels on the LCD which are not performing as expected.
Note: This function is only available to certain camera models.
Steps:
1. Enter the DPC Settings interface: Configuration > Image > DPC