User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Network Settings
- Chapter 7 Video/Audio Settings
- Chapter 8 Image Settings
- Chapter 9 Event Settings
- Chapter 10 Storage Settings
- Chapter 11 Playback
- Chapter 12 Picture
- Appendix
Thermal Network Bullet Camera User Manual
68
Mirror: It mirrors the image so you can see it inversed. Left/Right,
Up/Down, Center, and OFF are selectable.
Video Standard: 50 Hz and 60 Hz are selectable. Choose according to the
different video standards; normally 50 Hz for PAL standard and 60 Hz for
NTSC standard.
Capture Mode: It’s the selectable video input mode to meet the different
demands of field of view and resolution.
Digital Zoom: Select digital zoom as OFF, 2X, or 4X to display live view in
original size, 2X size digital zoomed, or 4X size digital zoomed.
• Other
Local Output: Turn on or off the local output of device.
3. (Optional) Click Default to restore the default settings
8.2 Configuring OSD Settings
Purpose:
You can customize the camera name, time/date format, display mode, and OSD size
displayed on the live view.
Figure 8-2 OSD Settings