User Manual

Thermal Network Bullet Camera User Manual
64
(5) Enter a region name for the chosen region.
(6) Click Save the save the settings of ROI settings for chosen fixed region.
(7) Repeat steps (1) to (6) to setup other fixed regions.
5. Set Dynamic Region for ROI.
(1) Check the checkbox to enable Face Tracking.
Note: To enable face tracking function, the face detection function should be
supported and enabled.
(2) Select the ROI level.
6. Click Save to save the settings.
Note: ROI level means the image quality enhancing level. The larger the value is, the
better the image quality would be.
7.4 metadata Settings
Before you start:
Go to 5.3.4 VCA Resource Type to set the VCA (Video Content Analysis) resource
type of your device.
Purpose:
To use the metadata for your third-party management platform, you should enable
metadata first.
Steps:
1. Go to Configuration > Video/Audio > metadata Settings.
2. Check the VCA type for metadata enabling.
3. Click Save to save the settings.
Figure 7-4 metadata Settings