User Manual

Thermal Network Bullet Camera User Manual
31
Minor Type, Start Time and End Time.
3. Click Search to search log files. The matched log files will be displayed on the
log list interface.
Figure 5-10 Log Searching
4. To export the log files, click Export to save the log files.
5.3.3 System Service
Purpose:
System service settings refer to the hardware service the camera supports. Supported
functions vary according to the different cameras. For the cameras support Automatic
De-Icing, IR LED, Auto Defog, or Status LED, you can select to enable or disable the
corresponding service according to the actual demands.
Automatic De-Icing: You can check the checkbox to enable Automatic De-Icing
function of the device. The de-icing heater is only supported under POE+, 24VAC, or
12VDC power supply.