Quick Start Guide
Table Of Contents
- Regulatory Information
- EU Conformity Statement
- Laws and Regulations
- Storage
- Transportation
- Installation
- Power Supply
- Battery
- System Security
- Maintenance
- Usage Environment
- Emergency
- 1. Appearance Description
- 2. Installation
- 3. Set the Network Camera over the LAN
- 4. Access via Web Browser
- 5. Appendix
DS-2TD2137-7P Thermal Network Bullet Camera Quick Start Guide
QSG DS-2TD2137-7P 041521NA 24
•
Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla
Firefox 5.0 and above version, or Google Chrome 18 and above version
Steps
1.
Open the Web browser.
2.
In the browser address bar, input the IP address of the network camera, and press the Enter key to
enter the login interface.
NOTE: The default IP address is 192.168.1.64.
If the camera is not activated, activate the camera first according to Chapter 3.2.
3.
Input the user name and password.
NOTE: The admin user should configure the device accounts and user/operator
permissions properly. Delete unnecessary accounts and user/operator
permissions.
The device IP address locks if the admin user performs seven failed password
attempts (five attempts for a user/operator).
4.
Click Login.
Figure 32, Login Interface
5.
Install the plug-in before viewing the live video and managing the camera. Follow the installation
prompts to install the plug-in.
NOTE: You may have to close the Web browser to finish the plug-in installation.
Figure 33, Download Plug-in
6.
Reopen the Web browser after installing the plug-in and repeat steps 2-4 to log in.
NOTE: For detailed configuration instructions, see the network camera user manual.