Quick Start Guide
Table Of Contents
- Regulatory Information
- EU Conformity Statement
- Laws and Regulations
- Storage
- Transportation
- Installation
- Power Supply
- Battery
- System Security
- Maintenance
- Usage Environment
- Emergency
- 1. Appearance Description
- 2. Installation
- 3. Set the Network Camera over the LAN
- 4. Access via Web Browser
- 5. Appendix
DS-2TD2137-7P Thermal Network Bullet Camera Quick Start Guide
QSG DS-2TD2137-7P 041521NA 20
3. Set the Network Camera over the LAN
NOTE: You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and
information leakage, strengthen your own protection. If the product does not work
properly, contact with your dealer or the nearest service center.
3.1
Wiring
Connect the camera to the network according to the following figures.
Figure 27, Connect Directly
Figure 28, Connect via a Switch or a Router
3.2
Activate the Camera
You must activate the camera by setting a strong password for it before you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software are all supported. We
will take activation via SADP software and Activation via Web Browser as examples to introduce camera
activation. Refer to the network camera user manual for Activation via Client Software.