Quick Start Guide
Table Of Contents
- Regulatory Information
- EU Conformity Statement
- Laws and Regulations
- Storage
- Transportation
- Installation
- Power Supply
- Battery
- System Security
- Maintenance
- Usage Environment
- Emergency
- 1. Appearance Description
- 2. Installation
- 3. Set the Network Camera over the LAN
- 4. Access via Web Browser
- 5. Appendix
DS-2TD2137-7P Thermal Network Bullet Camera Quick Start Guide
QSG DS-2TD2137-7P 041521NA 19
2.4.1 Install Network Cable Waterproof Jacket
Figure 25, Install Waterproof Jacket
Steps
1.
Feed the network cable through ① and ③ in order.
2.
Fix ② on the network cable between ① and ③.
3.
Place ⑤ onto the end of ⑥, and plug the RJ-45 male connector into RJ-45 female connector.
4.
Screw ③ to ⑥ clockwise.
5.
Push ② into ③.
6.
Secure ① with the ③ in a clockwise direction.
2.4.2 Waterproof Other Cables
After routing and connecting the cables, use the waterproof tapes to wrap the cables. Connected cables
and spare cables both should be wrapped as in the figures below.
Figure 26, Waterproof Cables