User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Network Settings
- Chapter 7 Video/Audio Settings
- Chapter 8 Image Settings
- Chapter 9 Event Settings
- Chapter 10 Storage Settings
- Chapter 11 Playback
- Chapter 12 Picture
- Appendix
Thermal Network Bullet Camera User Manual
73
Note: This function is only available to certain camera models.
Steps:
1. Enter the VCA Rule Display Settings interface: Configuration > Image >
VCA Rule Display
2. Select the desired font size and the line and frame color for the normal,
pre-alarm and alarm.
3. Click Save.
Figure 8-6 VCA Rule Display