User Manual

Thermal Network Bullet Camera User Manual
32
Figure 5-11 Log Searching
4. To export the log files, click Export to save the log files.
5.3.3 System Service
Purpose:
System service settings refer to the hardware service the camera supports. Supported
functions vary according to the different cameras. For the cameras support Automatic
De-Icing, IR LED, Supplement Light, ABF (Auto Back Focus), Auto Defog, or Status
LED, you can select to enable or disable the corresponding service according to the
actual demands.
Automatic De-Icing: You can check the checkbox to enable Automatic De-Icing
function of the device. The de-icing heater is only supported under POE+, 24VAC, or
12VDC power supply.
ABF: When ABF function is enabled, you can click on PTZ control panel to
realize auxiliary focus.
Supplement Light: For some models, you can check the checkbox of Enable
Supplement Light to reboot the system and enable the supplement light.