User Manual

Thermal Network Bullet Camera User Manual
90
delete it from the list; you can also define the color of the regions.
8. Check the checkbox of Enable Fire Source Detection Shield to enable this
function.
Note: You are allowed to draw up to 24 areas on the same image.
9.3 VCA Configuration
9.3.1 Configuring Overlay & Capture
Purpose:
You can enable to display the VCA information on stream or target information on
alarm picture and set the snapshot quality and resolution.
Steps:
1. Enter Configuration > VCA > Overlay & Capture.
2. Check the desired checkbox of display settings and select the snapshot quality and
resolution.
Figure 9-15 Overlay & Capture
Display information includes the display on picture and display on stream.
Display VCA info. on Stream: The green frames will be displayed on the target
if in a live view or playback.
Display Target info. on Alarm Picture: There will be a frame on the target on