Quick Start Guide

Wall Mounting
Ceilling Mounting
Install the Bracket onto the Wall
5. Adjust the camera to the optimal surveillance angle.
1) Loosen the pan adjusting screw to adjust panning position
[0° to 360° ]. Tighten the screw.
2) Loosen the tile adjusting screw to adjust the tilting
position [0° to 100°]. Tighten the screw.
3) Loosen the rotation adjusting screw to adjust the rotation
position [0° to 360° ]. Tighten the screw.
Pan Range
[0° to 360° ]
2
3
1
Tilt Range
[0° to 100° ]
Rotation Range
[0° to 360° ]
3-axis Adjustment
Please loosen the screws slightly until you can adjust the
camera. Do NOT remove the screws from the bracket.