Quick Start Guide
Table Of Contents
Ф10 mm
(0.39'')
Ф24 mm
(0.94'')
Drill Template (Type I Camera)
5. Align the hole of drill template with the screw hole of the
junction box base to place the junction box onto the wall.
6. Route the screw through the sealing ring, and fix the junction
box base on the wall with the screws.
Sealing Ring
Screw
Installing Junction Box Base
7. Route the cables through the cable hole.
8. Insert the latches into the latch holes to fix the bracket and
camera with the junction box.