Quick Start Guide

2 Installation
Before you start:
● Make sure the device in the package is in good
condition and all the assembly parts are included.
● The standard power supply is 12V DC or 24V AC,
please make sure your power supply matches your
camera.
● Make sure all the related equipment is power-off
during the installation.
● Check the specification for the installation
environment.
● Make sure that the wall is strong enough to withstand
eight times the weight of the camera and the bracket.
For the camera that supports IR, mind the following
precautions to prevent IR reflection:
● Do NOT remove the protective film until you finish the
installation. For any dust or grease on the cover, clean
them with clean soft cloth and isopropyl alcohol.
● Make sure that there is no reflective surface too close
to the camera lens. The IR light from the camera may
reflect back into the lens causing reflection.
● Do NOT drag the camera with its waterproof cables, or
the waterproof performance is affected.