User Manual

Thermometric Network Bullet Camera User Manual
108
9.5 Security Service
To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Steps:
1. Enter the security service configuration interface:
Configuration > Advanced configuration > Security >Security Service
Figure 9-10 Security Service
2. Check the checkbox of Enable SSH to enable the data communication security,
and uncheck the checkbox to disable the SSH.
3. Check the checkbox of Enable Illegal Login Lock, and then the device will be
locked if you input the incorrect user name or password for 5 continuous times.
Note: If the device is locked, you can try to login the device after 30 minutes, or
reboot the device first before retry.
9.6 Viewing Device Information
Enter the Device Information interface: Configuration > Basic Configuration>
System > Device Information or Configuration > Advanced Configuration>
System > Device Information.
In the Device Information interface, you can edit the Device Name.
Other information of the network camera, such as Model, Serial No., Firmware
Version, Encoding Version, Number of Channels, Number of HDDs, Number of
Alarm Input and Number of Alarm Output are displayed. The information cannot be
changed in this menu. It is the reference for maintenance or modification in future.