User Manual

Thermometric Network Bullet Camera User Manual
107
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Input the IP Adreess.
Figure 9-8 Add an IP
(3) Click the OK to finish adding.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
Figure 9-9 Modify an IP
(3) Click the OK to finish modifying.
 Delete an IP Address
Left-click an IP address from filter list and click Delete.
 Delete all IP Addresses
Click Clear to delete all the IP addrsses.
5. Click Save to save the settings.