User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- 5.1 Configuring Local Parameters
- 5.2 Configuring Time Settings
- 5.3 Configuring Network Settings
- 5.3.1 Configuring TCP/IP Settings
- 5.3.2 Configuring Port Settings
- 5.3.3 Configuring PPPoE Settings
- 5.3.4 Configuring DDNS Settings
- 5.3.5 Configuring SNMP Settings
- 5.3.6 Configuring 802.1X Settings
- 5.3.7 Configuring QoS Settings
- 5.3.8 Configuring UPnP™ Settings
- 5.3.9 Email Sending Triggered by Alarm
- 5.3.10 Configuring NAT (Network Address Translation) Settings
- 5.3.11 Configuring FTP Settings
- 5.3.12 HTTPS Settings
- 5.4 Configuring Video and Audio Settings
- 5.5 Configuring Image Parameters
- 5.6 Configuring and Handling Alarm Events
- 5.7 Temperature Measurement
- 5.8 VCA Configuration
- Chapter 6 Storage Settings
- Chapter 7 Playback
- Chapter 8 Log Searching
- Chapter 9 Others
- Appendix
Thermometric Network Bullet Camera User Manual
100
Figure 7-3 Playback Toolbar
Table 7-1 Description of the buttons
Icon
Description
Icon
Description
Play
Capture a picture
Pause
/
Start/Stop clipping video files
Stop
/
Audio on and adjust volume/Mute
Speed down
Download video files
Speed up
Download captured pictures
Playback by frame
/
Enable/Disable digital zoom
Note: You can choose the file paths locally for downloaded playback video files
and pictures in Local Configuration interface. Please refer to Section 5.1 for
details.
4. Drag the progress bar with the mouse to locate the exact playback point. You can
also input the time and click to locate the playback point in the Set
playback time field. You can also click to zoom out/in the progress bar.
Figure 7-4 Set Playback Time
Figure 7-5 Progress Bar
The different colors of the video on the progress bar stand for the different video
types.
Figure 7-6 Video Types