User Manual

Thermal Network Bullet Camera User Manual
78
Frame Rate:
Set the frame rate. The frame rate is to describe the frequency at which the
video stream is updated and it is measured by frames per second (fps). A
higher frame rate is advantageous when there is movement in the video
stream, as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds
to the higher video quality, but the better bandwidth is required.
Note: The maximum limit of the max. bitrate value varies according to
different camera platforms. For certain cameras, the maximum limit is 8192
Kbps or 12288 Kbps.
Video Encoding:
If the Stream Type is set to main stream, H.264 and H.265 are selectable,
and if the stream type is set to sub stream or third stream, H.264, MJPEG,
and H.265 are selectable. H.265 is a new encoding technology. Compared
with H.264, it reduces the transmission bitrate under the same resolution,
frame rate and image quality.
Note: Selectable video encoding types may vary according to different
camera modes.
H.264+ and H.265+:
• H.264+: If you set the main stream as the stream type, and H.264 as the
video encoding, you can see H.264+ available. H.264+ is an improved