User Manual

Thermal Network Bullet Camera User Manual
77
Notes:
• For some models, to enable the third stream, go to System >
Maintenance > System Service> Software and check the checkbox of
Enable Third Stream to reboot the system and enable the third stream.
• The main stream is usually for recording and live view with good
bandwidth, and the sub-stream can be used for live view when the
bandwidth is limited.
• To enable the third stream, go to System>Maintenance>System
Service> Software and check the checkbox of Enable Third Stream to
reboot the system and enable the third stream.
3. You can customize the following parameters for the selected stream type.
Video Type:
Select the stream type to video stream, or video & audio composite stream.
The audio signal will be recorded only when the Video Type is Video &
Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
Video Quality:
When bitrate type is selected as Variable, 6 levels of video quality are
selectable.