User Manual

Thermal Network Bullet Camera User Manual
67
Anonymous Access to the FTP Server (in which case the user name and
password won’t be required.): Check the Anonymous checkbox to enable
the anonymous access to the FTP server.
Note: The anonymous access function must be supported by the FTP
server.
6. Click Save to save the settings.
6.2.3 Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated
receivers if an alarm event is detected, e.g., motion detection event, video loss,
video tampering, etc.
Before you start:
Please configure the DNS Server settings under Configuration > Network >
Basic Settings > TCP/IP before using the Email function.
Steps:
1. Enter the TCP/IP Settings (Configuration > Network > Basic Settings >
TCP/IP) to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway
and the Preferred DNS Server.
Note: Please refer to Section 6.1.1for detailed information.
2. Enter the Email Settings interface: Configuration > Network >Advanced
Settings > Email.