User Manual

Thermal Network Bullet Camera User Manual
66
Figure 6-8 FTP Settings
2. Input the FTP address and port.
3. Configure the FTP settings; and the user name and password are required
for the FTP server login.
For your privacy and to better protect your system against security risks,
we strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own choosing
(using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers and special
characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4. Set the directory structure and picture filing interval.
Directory: In the Directory Structure field, you can select the root directory,
parent directory and child directory. When the parent directory is selected,
you have the option to use the Device Name, Device Number or Device IP
for the name of the directory; and when the Child Directory is selected, you
can use the Camera Name or Camera No. as the name of the directory.
5. Check the Upload Picture checkbox to enable the function.
Upload Picture: To enable uploading the captured picture to the FTP
server.