User Manual

Thermal Network Bullet Camera User Manual
65
settings you configure here.
4. Click Save to save and finish the settings.
Notes:
• A reboot is required for the settings to take effect.
• To lower the risk of information leakage, you are suggested to enable
SNMP v3 instead of SNMP v1 or v2.
6.2.2 Configuring FTP Settings
Purpose:
You can configure the FTP server related information to enable the uploading
of the captured pictures to the FTP server. The captured pictures can be
triggered by events or a timing snapshot task.
Steps:
1. Enter the FTP Settings interface: Configuration > Network > Advanced
Settings > FTP.