User Manual

Thermal Network Bullet Camera User Manual
62
6.2 Configure Advanced Settings
Purpose:
You can configure the parameters, including SNMP, FTP, Email, HTTPS, QoS,
802.1x, etc., by following the instructions in this section.
6.2.1 Configuring SNMP Settings
Purpose:
You can set the SNMP function to get camera status, parameters and alarm
related information, and manage the camera remotely when it is connected to
the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address,
the camera can send the alarm event and exception messages to the
surveillance center.
Note: The SNMP version you select should be the same as that of the SNMP
software. And you also need to use the different version according to the
security level you required. SNMP v1 provides no security and SNMP v2
requires password for access. And SNMP v3 provides encryption and if you
use the third version, HTTPS protocol must be enabled.
For your privacy and to better protect your system against security risks, we