User Manual

Thermal Network Bullet Camera User Manual
60
Figure 6-5 Port Settings
2. Set the HTTP port, RTSP port, HTTPS port and server port of the camera.
HTTP Port: The default port number is 80, and it can be changed to any
port No. which is not occupied.
RTSP Port: The default port number is 554 and it can be changed to any
port No. ranges from 1 to 65535.
HTTPS Port: The default port number is 443, and it can be changed to any
port No. which is not occupied.
Server Port: The default server port number is 8000, and it can be changed
to any port No. ranges from 2000 to 65535.
3. Click Save to save the settings.
Note: A reboot is required for the settings to take effect.
6.1.5 Configure NAT (Network Address Translation) Settings
Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware