User Manual

Network Camera User Manual
54
Chapter 6 Network Settings
Purpose:
Follow the instructions in this chapter to configure the basic settings and
advanced settings.
6.1 Configuring Basic Settings
Purpose:
You can configure the parameters, including TCP/IP, DDNS, PPPoE, Port, and
NAT, etc., by following the instructions in this section.
6.1.1 Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera
over network. The camera supports both the IPv4 and IPv6. Both versions can
be configured simultaneously without conflicting to each other, and at least
one IP version should be configured.
Steps:
1. Enter TCP/IP Settings interface: Configuration > Network > Basic
Settings > TCP/IP