User Manual

Thermal Network Bullet Camera User Manual
48
Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.
5.4.3 Security Service
To enable the remote login, and improve the data communication security, the
camera provides the security service for better user experience.
Steps:
1. Enter the security service configuration interface: Configuration > System >
Security > Security Service.
Figure 5-18 Security Service
2. Check the checkbox of Enable SSH to enable the data communication
security, and uncheck the checkbox to disable the SSH.
3. Check the checkbox of Enable Illegal Login Lock, and then the IP address
will be locked if the admin user performs 7 failed user name/password
attempts (5 times for the operator/user).
Note: If the IP address is locked, you can try to login the device after 30