User Manual

Thermal Network Bullet Camera User Manual
42
2. Click Browse to select the local upgrade file and then click Upgrade to
start remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't
disconnect power of the camera during the process, and the camera
reboots automatically after upgrade.
5.3.2 Log
Purpose:
The operation, alarm, exception and information of the camera can be stored in
log files. You can also export the log files on your demand.
Before you start:
Please configure network storage for the camera or insert a SD card in the
camera.
Steps:
1. Enter log searching interface: Configuration > System > Maintenance > Log.
Figure 5-10 Log Searching Interface
2. Set the log search conditions to specify the search, including the Major
Type, Minor Type, Start Time and End Time.