User Manual

Thermal Network Bullet Camera User Manual
28
Figure 4-4 Setting a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset, or double-click to edit the preset
name.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually
or when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click to
call the preset.
Or you can place the mouse on the presets interface, and call the preset by
typing the preset No. to call the corresponding presets.