User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Network Settings
- Chapter 7 Video/Audio Settings
- Chapter 8 Image Settings
- Chapter 9 Event Settings
- Chapter 10 Storage Settings
- Chapter 11 Open Platform setting
- Chapter 12 Playback
- Chapter 13 Picture
- Appendix
Thermal Network Bullet Camera User Manual
26
to the camera that supports PTZ control.
Purpose:
In the live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom control of the camera.
Note: To realize PTZ control, the camera connected to the network must
support the PTZ function or have a pan/tilt unit installed to the camera. Please
properly set the PTZ parameters on RS485 settings page referring to Section
5.2.3.
4.4.1 PTZ Control Panel
On the live view page, click next to the right side of the live view window to
show the PTZ control panel and click to hide it.
Click the direction buttons to control the pan/tilt movements.
Figure 4-3 PTZ Control Panel
Click the zoom/focus/iris buttons to realize lens control.
Notes:
There are eight direction arrows ( , , , , , , , ) in the